- Do not break or crack under unusual web tension.
- Require much lower web tension.
- Due to sleeve treat can be operated with much smaller air gap.
- Easy to replace
- Good Electrically Insulation
- Ozone Corona discharge resistance
- Suitable for continuous operation at 180º C & can be also operated at higher
temperature without loss of any mechanical & dielectric properties.
- Having high dielectric strength 250-500 Votts/mm
- Resilient & flexible for case of Insulation on to treatment roll
- Long Life
- Size available from 2” ID to 8” ID & wall thickness 2.00mm to 5.00mm (±0.2mm)
- Normally available from stock in opaque color
- Special size & colors available on request.
- Appearance Translucent.
- Hardness : 60-70 Shore A
- Density: 1.2
- Temperature range: - 80º to 250º C. (-110º to 480º F)
- Elongation at break 500%
- Tensile Strength: 11.0Mpa
- Tear Strength: 24kgf/cm